These grommets are for use with our 2-inch marker lights.
These 2-pin plugs are the standard plugs for most tail lights, turn signal lights and 2-pin marker lights.
Put tail lights on your truck without drilling into your truck body with these non-rusting stainless steel mounting brackets. Use them to mount under your front or back bumper.
These chrome bezels are perfect for your tail lights. Each bezel has screws that attach it to the rubber grommet of the tail light.
This rubber light housing is the standard issue housing for most PAR36 lights. Use any standard 4-inch lights in this housing to make your own light kits or just replace worn out rubber housings.
These painted, steel mounting boxes are perfect for mounting tail lights.
This 16 gauge primary wire is made in the USA and is rated 105°C. This copper wire comes in 100-foot increments and is recommended for trucks, tractors, cars and general service vehicles.
Use this mounting bracket for a standard 6.5-inch oval light. Note: Some people call them 6-inch lights, but they are really 6½ inches.
This two-wire unit will correct your lights from flashing erratically. It is sensitive, making it capable of 75 flashes per minute. It can be used on any voltage between 12v and 48v DC.
Simple hook-up will have you using this flasher unit in no time. The SHO-ME uses LED lights to flash seven different patterns, including alternating and synchronized.
For your 2" or 2-1/2" lights we have these black powder coated steel brackets so that you don't have to drill large holes in your truck or trailer for lights.
This steel welded box fits the standard oval 6 or 6-1/2" oval tail light with rubber grommet. The side of the is box is already pre cut for a 2" marker light and rubber grommet. Just drill your own holes for mounting or just weld it on!