These high quality LED lights have 15 diodes in each light. Red light is used for Stop (high brightness function) and Tail (low brightness function). The Amber light has a high and low function as well. The plug used for the lights is a standard 3 pin as seen in picture
New, 10-diode LED lights priced right! These lights can be purchased in Red for stop/ tail/ turn or Amber for marker and turn signal or Clear for backup light. These are the standard fit 6" oval truck and trailer lights. Each light comes with the rubber grommet and 3-pin offset plug and wires.
From Optronics, this new 4" round stop/ tail/ turn light is visually impressive. The outer ring of LEDs glow when the tail lights are on and when you use the brake function or turn signal, the outer ring lights up on "high" mode and the center LEDs also illuminiate.
These Attractive 18 diode lights fit a standard 4" rubber grommet. These lights have the clear lens so you don't know what color they are until they are lit. Standard 3 pin connection. Order the "Red Kit" or " Amber Kit" and receive the plug and rubber grommet with the light.
Tow Mart offers 2½” LED Marker Lights with 13 bright LED diodes. Both LED marker lights us a standard 2-wire connector. The red marker light can also be used as a DOT light. If you order the kit, you will receive the mounting grommet, 2-pin plug and the LED light.
Sealed in epoxy resin for vibration and moisture resistance, these die cast pedestal lights have 34 bright LEDs. Each light has three wires: white for ground, black for low brightness and red for high brightness. These are the chrome plated steel lights (not chrome plated plastic)